Antenna Active GPS LNA 5dBi Bracket Vehicle Mount w/ Cables to SMA

$10.25
SKU:
AGLNA2c3FT
Brand:

Availability:
In stock
Weight:
0.30 LBS
Write a Review

Antenna ACTIVE GPS LNA 5dBi Bracket Vehicle Mount w/ Cables to SMA

If you need a customized cable length: Contact Customer Service so that we can customize the connectors and cable lengths for you, for large orders.

  • Cables are (double-shielded, low-loss LMR-100 equivalent).
  • Standard configuration (in stock):  3-ft cable terminates with SMA-male connector.
  • Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.
  • V.S.W.R. < 2 
  • GPS antenna has SAW to filter other signals.
  • GPS antenna has a metal shield on its bottom side as a ground plane
  • This GPS antenna is Active GPS. We can customize the GPS to be passive, if needed, for large orders.

Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.

Mounting / Installation: Multiple Options: Comes with all of the following options

  • Bracket with screws
  • Through-hole Mount also called Screw Mount
  • Adhesive Mount
  • Can be mounted on:
    • Can mount on a fender, or other vertical object.
    • Wall or side an enclosure.
    • If mounted on a locked enclosure, it cannot be removed by vandal / thief because the nut for the screw-mount is on the inside.

Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Item

Specifications

GPS Antenna

Dielectric Antenna

Center Frequency

1575.42±1MHz

Band Width

CF±5MHz

Polarization

RHCP

Gain

2dBic ( Zenith )

V.S.W.R

< 1.5

Impendance

50Ω

Axial Ratio

3dB ( max )

LNA

Low Noise Amplifier

Gain

28±2dB

Noise Figure

< 1.5

Ex-band Attenuation

12dB@CF+50MHz/16dB@CF-50MHz

V.S.W.R

< 2.0

Supply Voltage

2.2~5V DC

Current Consumption

5~15mA

Mechanical

Cable

LMR-100 equiv. double-shielded low loss

Connector

SMA/MCX/FAKRA or others

Material

ABS

Mounting Method

Screw

Environmental

Operating Temperature

-40 ℃ ~+85 ℃

Relative Humidity

Up to 95%

Ingress Protection

IP67 (exclude cable outlet)

Vibration

10 to 55Hz with 1.5mm amplitude 2hours

Compliance

ROHS & REACH compliant

UL certification / rating of the flammability of the antenna housing (ABS):

  • Test Method: UL-94
  • The flame class of this ABS material is HB.

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

RELATED GPS ANTENNAS

 

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them. 

Customer Q&A and Comments

s