U.FL to FME-male Cable: 8-inch Double-Shielded Low Loss

$5.45
SKU:
FMEm8iUFL
Brand:

Availability:
In stock
Weight:
0.04 LBS

Antenna cable with an FME-male connector on one end and a U.FL female right angle connector on the other end.

  • Allows interconnection of devices with U.FL jack and FME-female interfaces: Antennas, antenna cables and wireless devices.
  • Use for coaxial extension, coaxial interface conversion, coax retrofit applications
  • Gold plated center contact for reduced signal loss.
  • Cable type is RG178

One end has a U.FL male connector (mates with U.FL-LP-66), and the other end has an FME-male (RFE-6000) connector.

U.FL mates with U.FL antenna jacks, found on many miniPCI cards & RouterBoards: Cable-connector U.FL-LP-66, found on mini-PCI wireless cards such as: Intel PRO / wireless 2200BG Network Connection (WM3B2200BG).

The length refers to the length of the cable between the connectors (not including the connectors).

Cable is double-shielded for low signal-loss, and is very flexible/easily bendable. Coaxial cable type is similar to LMR-100 but better quality than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The double-shielding is a major factor in the higher quality of this cable, translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use.

ROHS and REACH compliant: The entire product (connectors and cable) is free of heavy metals and compliant with REACH and ROHS 3.

Brand new, high quality connectors, precision machined in ISO 9001 facilities, and gold-plated for low loss.

FME (For Mobile Equipment) is a miniature 50 Ohm RF connector with excellent performance from DC to 2.0 GHz. FME is primarily used with RG-58 or equivalent coaxial cables employed in mobile applications and installations. FME female's narrow, cone-like shape allows FME cables to be snaked through the often tight access holes or spaces of a vehicle to the desired equipment location(s) where an FME male adapter to the required equipment connector series is fitted to the female cable connector. FME-female connectors have a nickel-plated brass body for enhanced corrosion resistance: This is the most weather-resistant, corrosion-resistant plating.

For 802.11N, 802.11G, 802.11B, 802.11AC, 802.11A, WiMax, 3G & 4G. 2.4GHz or 5GHz applications.

Data Alliance's high-quality soldered terminations of U.FL connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Write a Review