Seal / Weatherproof Coax & Power Connectors: 4 Rolls 12-FT x 1/2-inch

$21.95
SKU:
COAXSEAL105
Brand:

Availability:
In stock
Weight:
2.00 LBS
Write a Review

1/2 inch wide x 12 feet long. 4 – 12 foot rolls per box
• Insures good VSWR and long coax life. Coax-Seal is the only material that will adhere to vinyl and poly vinyl connector outer covers.

• Seals and protects all types of cable, wire and connectors from moisture and corrosion
• Adheres to all cable and wire hardware and cable jackets
• Offers years of protection from the effects of weather
• Stays flexible, hot or cold; easy to remove

Coax-Seal is simple and inexpensive solution to seal all of your connections for years of protection from moisture and corrosion. Because Moisture leads to inefficient physical connections and a noisy line & Corrosion results in the destruction of the line's ability to carry signals. Once corrosion starts, there is no way to stop it. Poor radiation patterns result and antenna efficiency drop. At higher frequencies, UHF, VHF and microwave ranges, water contamination cause losses that look like dead shorts. For amateur radio buffs, water contamination causes a significant change in VSWR.

Take a look at various Coax Seal:

COAXSEAL101 

COAXSEAL104 

COAXSEAL106 

SPECIFICATIONS

PACKAGING:

60" x1/2" wide consumer rolls, in retail packaging for
pegboard or counter display, with complete instructions.

12' industrial rolls, 1/2" wide with complete instructions.

Pre-cut strips, 1/2" wide, in 10" and 4" lengths, bulk packed.

10" strip in 3 !t" x 5 rl" envelope, with complete instructions
for use.

DESCRIPTION

Easily applied, hand-moldable, tacky black plastic mastic,
on peel-away paper backing, suitable for waterproofing a
wide variety of connections. Adheres to vinyl and PVC
outer jackets. Product is non-conductive, non-contaminating,
non-toxic, and UV-stable

APPLICATIONS:

Provides a long-lasting, waterproof seal for coaxial cable
fittings and many other connections. Use for TV and radio
antennas, satellite dishes, CATV, wireless networks,
marine electronics, radar and microwave installations,
and other applications requiring a moisture-free connection.

VISCOSITY:

ASTM D5-52, gm load, 5 sec.=7.0/10.0 mm. Non-hardening,
non-oxidizing at ambient temperature

TEMPERATURE RANGE:

Optimal application temperature: 40" F. to 110" F.

PERCENT SOLIDS:

98%

SOLVENTS:

None

OTHER PROPERTIES

Material is non-staining to paint; stays flexible and maintains
a waterproof seal over an extreme range of temperatures.
Will not crack at -200' F, will not slump at 350" Fl1hr

OPTIMUM CURE CYCLE:

Not curable

APPLICATION EQUIPMENT:

Hand applied

Customer Q&A and Comments