ETH-SP-G2 Ubiquiti® Ethernet Surge Protector ESD Protection Gen2

In stock
0.18 LBS

Ethernet Surge Protector ESD Protection for Outdoor High-Speed Networks

Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.

Additional ESD Protection

All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH SP adds another layer of protection to your outdoor, high-speed network.

Plug and Play Installation

Connect the ground and Ethernet cables in between your network devices.

Cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. 

The ETH-SP-G2 is engineered to protect Power over Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. 

Ideal for WISP Networks

All Ubiquiti  airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP-G2 is essential. For example, to guard against costly service calls, and to help your subscriber.

Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

 Dimensions  91 x 61 x 32.5 mm
 Weight  80 g (2.82 oz)
 Interface Connections  (2) RJ45 Female Connectors
 ESD/EMP Protection  Absorbing Transient Current with Response   to Surge Voltage from 100V/s to 1kV/µs
 DC Spark-Over Voltage  90V @ 100V/s
 Maximum Impulse Spark-over Voltage  700V @ 1kV/µs
 Discharge Current  5kA (Maximum)
 0.5kA (Normal)
 Maximum Insulation Resistance  1G ohm @ 50V
 Maximum Capacitance  1.0 pF @ 1 MHz
 Data Line Protection  RJ45 10/100/1000 Ethernet
 IEEE 802.3af
 PoE Support
 Shock and Vibration Certification  ETSI300-019-1.4 Standard
 Operating Temperature  -30 to 65° C (-22 to 149° F)
 Operating Humidity  10 to 90% Noncondensing


Write a Review