UAP-AC-IW In-Wall UniFi Access Point - Ubiquiti

In stock
0.41 LBS

The UniFi 802.11AC In-Wall Access Point transforms an Ethernet wall connection port into a dual-band 802.11AC Wi-Fi Access Point. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. The UniFi AC In-Wall AP provides simultaneous, dual-band, 2x2 MIMO technology, mounting options for international electric boxes and is available on our store (PoE adapters not included).


  • Pre-installed electrical wall box
  • Category 5 (or above) UTP cabling approved for indoor use
  • Phillips and flathead screwdrivers
  • T10 Security Torx bit (for Security Torx Screw option)
  • UniFi Switch with PoE
 Dimensions  139.7 x 86.7 x 25.75 mm
 Weight  200 g
 Networking Interface  (3) 10/100/1000 Ethernet Ports
 Button(s)  Reset
 Power Method  802.3at PoE+ Supported
 Power Supply  UniFi Switch (PoE)
 Power Save  Supported
 PoE Out  48V Pass-Through (Pins 1, 2+; 3, 6-)
 Max. Power Consumption
        with PoE Passthrough
 Max. TX Power
         2.4 GHz
         5 GHz
 20 dBm
 20 dBm
         2.4 GHz
         5 GHz
 2 x 2
 2 x 2
 Max. Data Speed
         2.4 GHz
         5 GHz
 300 Mbps
 866.7 Mbps
 Max. Range  100 m (328')
 Antennas  (1) Dual-Band Antenna, Single-Polarity
 Antenna Gain
         2.4 GHz
         5 GHz
 1 dBi
 2 dBi
 Wi-Fi Standards  802.11 a/b/g/n/ac
 Wireless Security  WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
 Mounting  1-Gang Electrical Wall Box (Not Included)
 Operating Temperature  -10 to 50° C (14 to 122° F)
 Operating Humidity  5 to 95% Noncondensing
 Certifications  CE, FCC, IC

                                                                                                        *Requires 802.3at PoE+ switch


Write a Review