Enclosure 14x12x7 w/120VAC, Heat, Fan FRP NEMA. Mounting Flange


In stock
12.50 LBS

This box HW-N14-1HF is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications.

Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid is fully gasketed. The enclosure material is UV stabilized and comes in machine tool gray.

Shipping: We ship by FedEx Ground, to any location in the continental US, for fixed shipping fee of $14.

Mounting Plate

The enclosure also features holes for two N-Bulkhead Lightning Protectors or Connectors, a grounding lug and cable conduit connector.

Hot and Cold Environments

To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling fan, internal temperatures can be better maintained. This model is ideal in Hot and/or Cold environments.

Comes with a 120 VAC 200 watts heating element and 120 VAC cooling fan. The fan and heater are controlled by solid state temperature controller. The standard unit has a fan turn-on temperature of +93° F (34° C) ±5° and a heat turn-on temperature of +16° F (-9° C ) ±5° The controller features improved temperature set point accuracy and can be factory modified for other temperature set points. The heater and fan are controlled by two integral high current solid state AC relays. The relays feature Zero Cross Detection for EMI reduction. No extra room for the controller is required since it is mounted underneath the plate. (A minimum order quantity is required for custom fan set points and other configurations.)

Lightning Protection

Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.


  • Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
  • Stainless steel quick release latches with padlock hasps
  • NEMA Type 3R, 3RX/IP24 rated
  • Fully gasketed raised Vented lid with removable filters & integral mounting flange
  • Features aluminum mounting plate with 120 VAC Outlets & Solid State Thermostat Controlled Heating System


  • Remote Wireless LAN WiFi equipment installations
  • Indoor and outdoor installation
  • Rapid Deployment Installations
  • Corrosive environments & hotspot applications
  • Protection of equipment from theft or damage


 Enclosure Material  Fiberglass Reinforced Polyester
 Enclosure Color  Machine Tool Gray
 Voltage  120 VAC
 Heater Power  200 Watts each (400 Watts)
 Fan Power  12 Watts each (24 Watts)
 Mounting Plate Material  .10” (2.5mm) Thick Anodized Aluminum
 Mounting Plate Dimensions  32.2 x 27.4 cm
 Weight  5.6 kg
 Outside Dimensions (max)  39.3 x 34.2 x 22 cm
 Inside Dimensions  34.3 x 29.2 x 14.7 cm
 Flame Rating  UL 94-5V
 RoHS Compliant  Yes
 Cable Feed  1/2” Cable Conduit Connector
 Ratings  NEMA Type 3R, 3RX/IP24


Temperature Controller Specification
 Fan Setpoint Temperature  +34° C (+93° F)
 Heater Setpoint Temperature  -9° C (+16° F)
 Hysteresis Window  5° C (9° F)


Write a Review