Cable Gland for Enclosure: PG-7 w/ Locknut: Fits LMR-100


In stock
0.08 LBS

Seal cable entries and keep contaminants such as liquids, gases and solid materials from entering into enclosures. Provide strain relief to reduce stress on components and termination points.

  • Clamping range fits our antenna cables made from 100-series coax: LMR-100 and equivalent.
  • Maximum strain relief through clamping range
  • IP 68 Achieved without Seal Rings
  • Locknut included
  • Gas and water-tight
  • Polyamide 6 Housing
  • Neoprene Sealing Sleeve
  • Trapezoidal Thread with High Torque Guarantees Tight and Permanent Fit of the Dome Nut
  • Temperature Range:  –25degC to 100degC (–13degF to 212degF)
  • Widely Used, Suitable for Most Applications 
   Brass  Lt Gry Polyamide 6  Blk Polyamide 6   Lt Gry Polyamide 6  Blk Polyamide 6
 Application  For machines and devices
 Clamping Range  2.5-6.5 mm  3.0-6.5 mm  2.5-6.5 mm  1.5 to 5 mm
 Color  Nickel  Gray  Black  Gray  Black
 Diameter Outer  12.5mm
 Diameter Inner  6.7 mm  7 mm  6.7 mm
 Height  14 mm  32 mm
 Length  25 mm  35 mm  32 mm
 Material  Nickel-Plated Brass  Polyamide 6
 Material, Seal  Neoprene
 Mounting Hole Size  12.5 mm  N/A
 Product Header  Nickel Plated Brass Cable Gland  Industrial Cable Gland  Polyamide Cable Gland
 Protection  IP68  N/A  IP68
 Protection Class  Gland, Cable 
 Temperature Range  -40 to +100 °C (Polyamide 6), -25 to +100 °C (Neoprene) °C
 Width  N/A   15mm
 Standard  N/A   UL Recognized, CSA Certified and VDE Approved  


Write a Review