WiFi 7 / WiFi 6E Antenna 2.4/5/6 GHz, 5dBi, RP-SMA male

WiFi 7 / 6E Antenna 5dBi, RP-SMA Hinged Omnidirectional

Compact, high-performance omnidirectional antenna designed for wireless networking applications across the 2.4 GHz, 5 GHz, 6 and 7.125 GHz frequency bands. Featuring a rated gain of 5 dBi, a 50-ohm impedance, and an RP-SMA-male connector, this versatile antenna is suitable for compatible Wi-Fi 7 and Wi-Fi 6E routers, wireless access points, gateways, and other wireless networking equipment.

The AWD139 operates across two specified frequency ranges: 2.4–2.5 GHz and 4.9–7.125 GHz, providing coverage for traditional WiFi frequencies as well as the expanded 6 GHz spectrum used by WiFi 6E technology.

Its adjustable hinged design allows the antenna to be positioned straight or at a right angle, providing installation flexibility for equipment mounted on desks, walls, inside cabinets, or in confined spaces.

Key Features and Benefits

• Wide-band WiFi coverage: Supports 2.4 GHz, 5 GHz, 6 GHz bands up to 7.125 GHz frequency used by compatible WiFi networking equipment.

• 5 dBi rated antenna gain: Designed for effective wireless coverage, with measured gain varying by frequency.

• Omnidirectional radiation pattern: Provides wireless signal coverage around the antenna, making it suitable for access points, routers, and networking devices serving multiple directions.

• WiFi 7 and 6E frequency compatibility: Covers the extended 6 GHz frequency spectrum through 7.125 GHz for compatible Wi-Fi 6E and Wi-Fi 7 devices.

• Adjustable hinged design: Accommodates straight and 90-degree configurations for flexible antenna positioning.

• RP-SMA-male connector: Provides a threaded connection to equipment equipped with compatible RP-SMA-female antenna ports.

• 50-ohm impedance: Matches the characteristic impedance commonly used in WiFi and RF networking equipment.

• Compact construction: Approximately 140 mm (5.51 inches) overall length in the straight configuration.

• Black UV-resistant radome: Designed to resist ultraviolet exposure, with a durable, unobtrusive appearance.

• Wide operating temperature range: Rated for operation from -40°C to +80°C.

WiFi 6E Coverage Across 2.4, 5, 6 and 7 GHz

The AWD139 is designed to accommodate the expanded frequency requirements of modern wireless networking equipment.

2.4 GHz WiFi: Provides compatibility with wireless equipment operating in the 2.4 GHz frequency band. This band is commonly used for legacy WiFi connectivity, smart home devices, and IoT applications.

5 GHz WiFi: Supports equipment operating in the 5 GHz WiFi spectrum, commonly used for higher-throughput wireless networking, enterprise access points, and reduced interference compared with crowded 2.4 GHz environments.

6 GHz WiFi 6E: Extends antenna coverage through 6 GHz spectrum, enabling use with compatible WiFi 6E equipment, to avoid congestion in the lower frequency bands.

7 GHz WiFi 7:  Antenna coverage through 7.125 GHz enables use with compatible WiFi 7 equipment operating in the 7 GHz spectrum. This additional spectrum supports wider channels and can reduce congestion.

The antenna's multiband frequency coverage makes it a practical choice for wireless installations requiring compatibility across several WiFi frequency bands.

Technical Specifications

Measured Antenna Gain and Efficiency

The antenna has been characterized at multiple frequencies across its operating bands. The datasheet reports the following measured results:

These measured figures demonstrate how antenna gain and efficiency vary across the supported frequencies. The rated 5 dBi gain should not be interpreted as constant across all operating bands.

Applications

The AWD139 is suitable for a variety of wireless networking applications, including:

• WiFi 6E routers and access points

• Tri-band wireless networking equipment

• Wireless gateways and industrial WiFi devices

• WiFi-enabled IoT and embedded systems

• Enterprise and commercial wireless networks

• Wireless monitoring and communication equipment

• Wireless networking systems requiring an external RP-SMA antenna

Adjustable Hinged Design and Installation

The AWD139 features an articulated antenna body that provides flexibility when mounting the antenna directly to wireless networking equipment.

The straight configuration is appropriate when the antenna can extend outward from the equipment, while the 90-degree configuration allows the antenna to be positioned vertically when the antenna port is located on the rear or side of the device.

For best performance, position the antenna vertically where practical, and avoid installing it immediately adjacent to large metal surfaces that could affect the radiation pattern.

Connector compatibility: The AWD139 uses an RP-SMA-male connector, which is different from a standard SMA-male connector. Confirm that your equipment has a compatible RP-SMA-female antenna port before ordering.

Although the radome is specified as UV-resistant, the datasheet does not provide a waterproof or IP ingress-protection rating.

Versatile WiFi 6E Antenna

With its wide frequency coverage, 5 dBi rated gain, adjustable hinged construction, and RP-SMA-male connector, the Data Alliance AWD139 offers a practical external antenna solution for compatible WiFi 6E and multiband wireless networking equipment.