WiFi 7 / WiFi 6E Antenna 2.4/5/6/7 GHz 5dBi | RP-SMA Adjustable

WiFi 7 / WiFi 6E Antenna, 2.4/5/6/7 GHz, 5dBi, Hinged Paddle Design|RP-SMA

Compact, tri-band omnidirectional antenna designed for wireless routers, access points, gateways, and other WiFi networking equipment. Operating across 2.4–2.5 GHz and 4.9–7.125 GHz, it provides frequency coverage for the 2.4 GHz, 5 GHz, and 6 GHz bands used by WiFi 7 (802.11be), WiFi 6E (802.11ax), and compatible earlier WiFi technologies.

Featuring 5 dBi rated gain, 50-ohm impedance, and an RP-SMA-male connector, the AWD161 combines broad frequency coverage with a convenient, adjustable hinged design.

Its distinctive flat paddle-style housing measures approximately 161 mm (6.34 inches) in overall length and 22 mm (0.87 inches) in width. The slim, 7 mm-thick antenna body provides a low-profile appearance while offering flexible positioning for compatible wireless devices.

Key Features and Benefits

• WiFi 7 and WiFi 6E compatibility: Frequency coverage for compatible devices operating in the 2.4, 5, 6, and 7.125 GHz WiFi bands.

• 5 dBi rated gain: Supports wireless signal reception and transmission, with actual gain varying by operating frequency.

• Omnidirectional radiation pattern: Provides signal coverage around the antenna, rather than concentrating transmission in one horizontal direction.

• Adjustable hinged design: Allows the antenna to be positioned straight or at a right angle to accommodate different mounting arrangements.

• RP-SMA-male connector: Threaded interface compatible with equipment having an RP-SMA-female antenna port.

• 50-ohm impedance: Matches the characteristic impedance commonly used in WiFi routers, access points, and RF communication equipment.

• Flat paddle-style construction: A slim, discreet profile suitable for professional networking installations.

• UV-resistant black radome: Provides a durable external housing with a professional appearance.

• Wide operating temperature range: Specified for temperatures from -40°C to +80°C.

WiFi 7 and WiFi 6E Frequency Coverage

The AWD161 supports three major WiFi frequency bands:

2.4 GHz WiFi: Provides compatibility with equipment using the widely deployed 2.4 GHz band. This band is commonly used for general wireless connectivity, IoT devices, and applications where broader coverage is important.

5 GHz WiFi: Supports wireless equipment operating in the 5 GHz spectrum, commonly used for high-throughput networking, enterprise access points, and applications requiring more available channels than the 2.4 GHz band.

6~7.125 GHz WiFi: Extends antenna frequency coverage through 7.125 GHz, supporting compatible WiFi 6E and WiFi 7 radios operating in the 6 GHz spectrum. This expanded spectrum supports wider channels and additional wireless capacity where permitted by local regulations.

Because the AWD161 is a passive antenna, advanced WiFi 7 features such as Multi-Link Operation and 320 MHz channels depend on the connected radio equipment.

Technical Specifications

Measured Antenna Gain & Efficiency

The AWD161 datasheet provides measured gain and efficiency results at several frequencies across its supported operating bands.

The measurements demonstrate frequency-dependent antenna performance, with reported gain reaching 6.27 dBi at 6.125 GHz. The 5 dBi rated gain should not be interpreted as constant across the entire frequency range.

Applications

Suitable for compatible wireless networking equipment, including:

• WiFi 7 and WiFi 6E routers

• Tri-band wireless access points

• Enterprise and commercial wireless networks

• Industrial wireless gateways

• Wireless monitoring and telemetry equipment

• WiFi-enabled IoT devices

• Embedded wireless networking systems

• Wireless equipment requiring an external RP-SMA antenna

Adjustable Design & Installation Flexibility

Features a hinged antenna base that allows adjustment of the antenna's orientation relative to the connector.

The straight configuration extends approximately 161 mm from end to end, while the right-angle arrangement makes it convenient to position the paddle vertically when the device's antenna port faces horizontally.

This flexibility is particularly useful for wireless routers, network cabinets, industrial gateways, and other installations with restricted clearance around antenna connectors.

For best results, position the antenna vertically when practical and avoid placing it directly against large metal surfaces that may affect its radiation pattern.

Connector Compatibility

Standard RP-SMA-male connector, designed to mate with compatible RP-SMA-female antenna jacks.

RP-SMA and standard SMA connectors differ in their center contacts. Verify the connector configuration of your wireless device before ordering.

Tri-Band Wi-Fi Antenna

With its broad frequency coverage, 5 dBi rated gain, adjustable hinged design, and compact paddle-style housing, the Data Alliance AWD161 provides a versatile external antenna solution for compatible WiFi 7, WiFi 6E, and multiband wireless networking equipment.