PoE Adapter: Industrial w/ redundancy. Passive Dual Power Input DC Jack 2.1mm & 3-pin


In stock
0.07 LBS
Write a Review

2 Reviews

  • 5
    Great little unit.

    Posted by CJ on 1st Jun 2016

    I use this unit exclusively, compact design and mounting tabs work well for my needs. The dual power feature is also a life saver for me.

  • 5
    Power redundant a huge bonus.

    Posted by CJ on 21st Dec 2015

    This seems to be a great unit so far. The power redundant feature is a real life saver for critical systems. Also the mounting holes are much appreciated.

PoE Adapter

Key Features:

► Support Fast Ethernet Passive PoE-enable device (PIN 1/2/3/6 Data. PIM 4/5/7/8 Power).
► Provide both data and electrical power to Passive PoE-enabled device.
► Support Wide Range input/output DC Power (5V – 57V at Max.48W).
Dual DC Power Input: 3-pin Screw Terminal Block and Power Jack (2.1mm standard DC barrel).
Wall mountable.

Power over Ethernet Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom.

The installation is simple and easy for APOE03 it does not require any tools or software. Plug the APOE03 into a power outlet and connect the APOE03 to your passive PoE device using any standard Ethernet cable. Once APOE03 setup has been completed the output power is compatible to any 5VDC, 12VDC, 24VDC, 48VDC, 57VDC (Max. 48W) Passive PoE-enable device.

For IP cameras with IEEE802.3 af/at standard PoE: Use a 48V power supply with this POE injector APOE03. A 48V power supply with a standard DC barrel connector is the best option, for easiest installation.

Power PIN 4/5, 7/8
Data PIN 1/2, 3/6
Data In Connects PC/HUB/Switch
Ethernet Data Rate 10/100TX Mbps
Ethernet Cable Cat.5 / Cat.5e / Cat.6
Ethernet Cable Connector RJ45
Support Input Voltage 5V – 57V (Max.48W)
Support Output Voltage 5V – 57V (Max.48W)
Built-In LED Indicators Power
Operating Temperature -0°C ~ 40°C
Storage Temperature -20°C ~ 60°C
Operating Humidity 10% to 80% Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Power Supply 110 – 220V AC Power ; 5V – 57V DC input
Unit Dimensions 67*67*24mm (W*L*H)
Unit Weight 40g