Data Alliance's GNSS signal splitter is the solution to split a GPS antenna's signal for two GPS receivers.
Solves these problems:
- A combo antenna cannot have two GPS internal antennas, because both would have too much interference.
- GPS antennas cannot be placed too close together because they cause interference for each other.
We can provide this with SMA connectors, of course, or any connector, on the splitter cables.
Item Specifications
Splitter Frequency Range 1535~1616MHz
Wave Band GPS L1/COMPASS B1/GLONASS G1
Impedance 50Ω
Insertion Loss <1.5dB
Isolation Value ≥15dB
V.S.W.R <1.5
Withstand Voltage: 18V DC Max
Withstand Current: 100mA Max
Cable: LMR-100 equivalent (double-shielded)
Insertion Loss≈1.2dB/m@1575MHz
Connectors: SMA, FAKRA or others
Plastic Housing: ABS
Operating Temperature: -40℃~+85℃
Relative Humidity Up to 75%
Vibration 10 to 55Hz with 1.5mm amplitude 2hours
Environmentally Friendly ROHS Compliant