LiteBeam LBE-5AC-GEN2 5GHz - Ubiquiti

In stock
2.16 LBS

Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.

The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.

 Dimensions 358 x 271.95 x 272.5 mm 
      Without Mount
      With Mount

800 g (1.76 lb) 

980 g (2.16 lb) 

 Power Supply 24V, 0.3A Gigabit PoE Adapter (Included) 
 Max. Power Consumption 7W 
 Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) 
 Supported Voltage Range 24V ± 10% 
 Operating Frequency 2412 - 2462 MHz 
5150 - 5875 MHz 
 Gain 23 dBi 
 Networking Interface (1) 10/100/1000 Ethernet Port 
 Processor Specs MIPS 74Kc 
 Memory 64 MB DDR2 
 LEDs Power, Ethernet 
 Channel Sizes
      PtP Mode
      PtMP Mode

 10/20/30/40/50/60/80 MHz 
 10/20/30/40 MHz 
 Enclosure Characteristics Reflector (SGCC 0.6T) / Plastic: PC 
 Mounting Pole-Mounting Kit (Included) 
 Wind Loading 275 N @ 200 km/h (61.8 lbf @ 125 mph) 
 Wind Survivability 200 km/h (125 mph) 
 ESD/EMP Protection ± 24 kV Contact / Air 
 Operating Temperature -40 to 70° C (-40 to 158° F) 
 Operating Humidity 5 to 95% Noncondensing 
 Certifications CE, FCC, IC 


Write a Review