U.FL to SMA-male Cable: 3-inch 4" 5-in 6" 7-in 8" 10-in 1FT, 14-in 16" 18" 20" 2FT 26" 28"

$3.25
SKU:
Sm3iUFL113
Brand:

Availability:
In stock
Weight:
0.04 LBS

SMA-male to U.FL Cables:  3 inches up to 10 feet

Antenna Cable / Adapter: SMA male to U.FL

  • Cable length refers to the length between the connectors (not including the connectors)
  • One end has a U.FL connector (female, right-angle) and the other end has a SMA male connector.
  • Data Alliance's high-quality soldered terminations of SMA and U.FL connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Coaxial cable type options for our U.FL cables:

  • 1.13mm mini-coaxial cable (Impedance: 50 Ohms): This is a very thin and flexible cable, with a black jacket. When connecting U.FL connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible (diameter is 1.13mm). This very thin cable is typically needed in tight spaces inside of enclosures, so that the U.FL connector will snap down on the jack without popping off.

  • RG174 coax is thicker and has lower signal loss (attenuation) than 1.13mm while also being flexible/easily bendable. RG174 is better quality than 1.13mm and has a black jacket. The higher quality of this cable translates into lower loss/better performance. This cable is rated for outdoor use and is also suitable for indoor use. Note that LMR-100 coax is too thick in diameter to use with U.FL connectors.

  • 1.32mm coax is double-shielded while also very thin (1.32mm diameter).
  • 1.37mm coax is another low-loss option.
  • Special Orders: Please see this page about options for thickness of the coax, and note that we can make special orders with 1.13mm, RG174, 1.32mm and 1.37mm coax, if you want a lower-loss, thicker cable for the shorter versions of this cable. Contact us to make a special order.

https://d.img.vision/www.data-alliance.net/comparison-1.13mm-1.32-mm-1.37mm-rg174-coax-for-ufl-to-sma-cables.jpg

Compatibility with wireless standards and applications:

Our UFL to SMA "pigtail" cables' range of frequency band compatibility (from DC 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them suitable and compliant for all the above applications.

U.FL cable connector mating installation and removal from jack: Push-pull insertion tool.

U.FL Connectors Characteristics

  • U.FL female has a socket. U.FL male has a pin and is the connector that is the "jack" on a devices such as BlueTooth boards, and ZigBee radios such as XBee, Printed Circuit Boards (PCBs) and internal mini-PCI wireless cards (even though the gender is male, it is the jack U.FL connector.
  • U.FL connectors are widely used in M2M and IOT (Internet of Things) wireless applications.
  • U.FL female right-angle type is the most common U.FL connector type found on U.FL cables: 95% of U.FL cables have a U.FL female right-angle connector.
  • Gender Determination: Micro-connectors such as U.FL have gender that is counter to typical RF terminology for gender, in that "jack" is more typically synonymous with "female:" A U.FL jack on a board (PCB) is the male U.FL, and the connector that mates with the jack is the female.
  • Connecting and disconnecting U.FL connectors from the jack can be difficult to do properly without damaging the U.FL connector or jack. We offer a U.FL insertion tool to enable you to connect/insert and remove/disconnect easily, without causing any damage to the cable, connector or jack.
  • U.FL connector is also known as Ultra Miniature Coax Connectors (UMCC), and enables attaching antenna to a U.FL jack/connector on PCBs: U.FL female mates with a female HiRose/U.FL jack, also known as U.FL-LP-66 jack/connector.
  • U.FL connector is precision machined and gold-plated brass for low signal loss.

SMA Connector & Characteristics:

SMA-male has a pin inside the connector body

SMA-male has a pin inside the connector body

RoHS 3 and REACH compliant: All of our antenna cables and RF adapters are compliant with RoHS 3 and REACH standards of content limits of lead and other toxic materials.

Write a Review

1 Review

  • 5
    exactly what I needed

    Posted by Unknown on 24th Nov 2016

    Very fast shipping and they have anything and everything you need! I'll definitely be buying f here in the future!