One end has a U.FL connector (mates with U.FL-LP-66), and the other end has a RP-SMA female connector.
We offer two thicknesses of the coax cable for the 8-inch version:
1.13mm mini-coaxial cable (50 Ohm): This is a very thin and flexible cable, with a black jacket. When connecting U.FL connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible (diamter is 1.13mm). This very thin cable is typically needed in tight spaces inside of enclosures, so that the U.FL connector will snap down on the jack without popping off.
Please see this note about options for thickness of the coax, and note that we can make special orders for the 10-inch version with LMR-100 equivalent, if you want a thicker, double-shielded low-loss cable: Contact us for special order.
The LMR-100-equivalent cable-type is equivalent or better than LMR100A: Has the same or better signal-loss-per-meter and flexibility as LMR100A, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.
Connectors are precision machined in ISO 9001 facilities, and gold-plated for low loss. ROHS compliant: The entire product is ROHS compliant (connectors and cable).
U.FL connector attaches antenna to U.FL jack/connector on internal wireless card: Mates with cable-connector U.FL-LP-66, found on mini-PCI wireless cards such as Ubiquiti, MikroTik, Intel PRO.
RP-SMA female connector includes a bulkhead nut and washer:
RP-SMA female diameter:
RP-SMA Female connector composition:
RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas, including WiFi & WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.
This antenna cable is suitable for wireless / WiFi and WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.
The mini-PCI card in one of the photos is for compatibility-evaluation only and is not included.
RP-SMA-female connector fits items that have an RP-SMA-male connector. RP-SMA = Reverse Polarity SMA
GENDER DETERMINATION: Gender of RP-SMA is counter-intuitive: Please observe picture & note it is correct.
The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside. More details regarding SMA gender determination.
U.FL connector mates with cable-connector U.FL-LP-66, found on mini-PCI wireless cards such as: MikroTik, Ubiquiti, Intel PRO
This pigtail enables connection of an external antenna to a mini-PCI wireless card with a female HiRose/U. FL connector U.FL-LP-66 connector. Mini-PCI wireless cards are designed for laptops.