U.FL-male to SMA-male Adapter: U.FL connector snaps for permanent fit
- SKU:
- SmUFLm
- Availability:
- In stock
- Weight:
- 0.03 LBS
Data Alliance
SMA male to U.FL-male
Adapter for antenna Cable: SMA male to U.FL-male
- See also our U.FL-male to SMA cables.
- One end has a U.FL male connector and the other end has a RP-SMA male straight connector.
Compatibility with wireless protocols and applications:
- All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications
- IoT wireless, automation & (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors .
This antenna cable adapter's range of frequency band compatibility (from DC 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.
U.FL Connectors Characteristics- U.FL female has a socket. U.FL male has a pin and is the connector that is the "jack" on a devices such as Bluetooth boards, and ZigBee radios such as XBee, Printed Circuit Boards (PCBs) and internal mini-PCI wireless cards (even though the gender is male, it is the jack U.FL connector.
- U.FL connectors are widely used in M2M and IoT (Internet of Things) wireless applications.
- U.FL female right-angle type is the most common U.FL connector type found on U.FL cables: 95% of U.FL cables have a U.FL female right-angle connector.
Gender Determination: Micro-connectors such as U.FL have gender that is counter to typical RF terminology for gender, in that "jack" is more typically synonymous with "female:" A U.FL jack on a board (PCB) is the male U.FL, and the connector that mates with the jack is the female.
- Connecting and disconnecting U.FL connectors from the jack can be difficult to do properly without damaging the U.FL connector or jack. We offer a U.FL insertion tool to enable you to connect/insert and remove/disconnect easily, without causing any damage to the cable, connector or jack.
- U.FL connector is also known as Ultra Miniature Coax Connectors (UMCC), and enables attaching antenna to a U.FL jack/connector on PCBs: U.FL female mates with a female HiRose/U.FL jack, also known as U.FL-LP-66 jack/connector.
- U.FL connector is precision machined and gold-plated brass for low signal loss.
Insertion loss: 0.26 dB maximum
Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
RoHS 3 and REACH compliant: All of our RF adapters and antenna cables are compliant with RoHS 3 and REACH restrictions for content of lead and other heavy metals and toxins.
