SMA male to SMA male Cable: 18-inch, 20-in, 24-inch, 30-inch, 3-FT
$4.39
- SKU:
- Sm18iSm100
- Availability:
- In stock
- Weight:
- 0.06 LBS
Brand:
Data Alliance
SMA male to SMA male Cable
- Cable length options on this page: 46 centimeters (18 inches), 24 inches (2-feet), 30-inches, and 3-feet.
- See other length options of SMA-male to SMA-male cables: Both ends have an SMA (male) connector.
- For coaxial extension, coaxial interface conversion, and coax retrofit applications.
- See also: SMA cables index page
- Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
We offer two options for the thickness of the cable (both are double-shielded, with a black jacket):
- The LMR-100-equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable translates into lower loss/better performance. The cable is equivalent to LMR-100 in thickness.
- The LMR-200-equivalent cable type has much lower attenuation (signal loss) than LMR-100 and RG58.
- Our cables are built to last, with a rating for outdoor use and suitability for indoor use. This versatility ensures they can withstand various environments, providing you with reliable connectivity wherever you need it.
- Double-shielding the 100 and 200 series coax enables low signal loss. Both are flexible and easily bendable (the 100 series is more flexible and bendable). Double-shielding is a significant factor in the higher quality of this cable, which translates into lower loss and better performance.
- See comparison of 100-series and 200-series attenuation (signal loss).
The temperature range for the operational use of these cable assemblies is as follows:
- Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
- Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
Compatibility with wireless applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners, and all other Helium LongFi miners, as are our antenna cables and adapters with SMA-male connectors.
Our SMA cables ' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables make them compatible and compliant with all the above applications.
ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and other toxic materials restricted by RoHS 3 and REACH.
SMA Connector Characteristics and Details
- SMA Gender Determination: Key Point
- SMA gender is counter-intuitive: Please observe the picture & note it is correct.
- The gender refers to the pins inside the threads. SMA male has threads on the inside.
SMA-male has a pin inside the connector body
RELATED PRODUCTS:
