SMA Female to Female Cable: 6-inch 10" 1FT 18" 30-inch: Double-Shielded
- SKU:
- Sf6iSf5
- Availability:
- In stock
- Weight:
- 0.05 LBS
Data Alliance
SMA Female to Female Antenna Cable
SMA female connector on both ends.
- The cable length between the connectors is the length option referenced above as choices on this page.
- The connectors are straight SMA-female connectors on both ends of the cable.
- Allows interconnection of devices SMA male interfaces: Antennas, antenna cables and wireless devices.
- For coaxial extension, c oaxial interface conversion, coax retrofit applications
- Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Antenna Cable Coax is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. Rated for outdoor use and are also suitable for indoor use.
The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)
SMA female connector includes a bulkhead nut and washer for mounting and/or weatherproofing the connector / port:
- This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
- Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
- All of our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.
- The length of our standard SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
 |
 |
| The version of the SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some of our "stocked" SMA cable versions, and others by special order. | The longer SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some of our "stocked" SMA cable versions, and others by special order. |
SMA Gender Determination: Key Point
- SMA gender is counter-intuitive: Please observe picture & note it is correct.
- The gender is referring to the pins inside-not the threads. SMA male has threads on inside.
Compatibility with wireless applications: Our SMA extension cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them suitable and compliant for all the following applications.:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax: Data and voice applications
- IoT wireless, automation & M2M: Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
RoHS and REACHcompliant: All of our antenna cables and adapters are compliant with the RoHS & REACH restrictions on content of lead, other heavy metals and toxins.
RELATED PAGES:
