Antenna w/ Spring-Base 2.4GHz 7.4dBi Omni WiFi. N-male connector

$47.50
SKU:
A7o
Brand:

Availability:
In stock
Weight:
0.45 LBS
MPN:
A7o
Antenna w/ Spring-Base 2.4GHz 7.4dBi Omni WiFi. N-male connector

Antenna w/ Spring-Base Omni WiFi

2400MHz Omni-directional Antenna w/Spring at Base & four mount options

Spring base: Can withstand winds up to 150MPH; absorb vibration.

Omni directional dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it.

Compatibility with wireless standards & applications: This omni directional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its very low broadband VSWR (lower VSWR is better), and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Features & applications

  • As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
  • As client antenna: Connect to an access point in any direction
  • Capable of extending your wireless range up to 300 meters.

SPECIFICATIONS:

Frequency: 2400-2500MHz
Gain: 7.4dBi
Length: 19 inches (48.3cm)
Weight: 4.7 oz (133g)
Beam-width: 20 degrees
Cross Polar Rejection: -3dB / +15dB
Max Power: 50 watts
Max wind survival: 150MPH +
Wind Load: 7.1 sq in
Connector: N-male
Radome: Black UV stabilized fiberglass. Waterproof.

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

N-type Connector Characteristics and Details: Durable, weatherproof connection

  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm) . N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive .
  • N-Type connectors are the largest of the RF connector types , and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
  • N materials composition:
    • Connector Body: Nickel-Plated Brass : The most corrosion-resistant of all plated brass alloys (better than gold-plated). 
    • Center Contact: Beryllium Copper, Gold Plated
    • Crimp Ferrule: Copper, Nickel Plated
    • Insulators: PTFE

Mount Options:

  • With our waterproof N-male connector they can be easily mounted to an L-mount (for wall or pole-mounting) or enclosure to give total wireless coverage.

Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut and washer on the N-male cable.

RELATED PAGES:

All of our antennas pass QC test before we ship them.

Write a Review