RP-TNC male Right Angle to RP TNC female: 1FT, 18 inch Extension Cable

$8.35
SKU:
RTmRA12iRTfRG58
Brand:

Availability:
In stock
Weight:
0.17 LBS

RP-TNC male Right Angle to RP TNC female

RP-TNC Female to RP TNC Male Right Angle: Antenna cable/extension.

Coax type is RG58, which is thicker than LMR-100 and thinner and more flexible than LMR-200.

RG-58 compared to LMR-100 coaxial cable for RP-TNC antenna cables

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

RP-TNC female (right angle) connector includes a bulkhead nut and washer:

RP-TNC-female connector with embedded o-ring

  • This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
  • Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
  • Data Alliance's high-quality soldered terminations of RP-TNC connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RP-TNC is a round screw-type connector, with nickel-plated brass.

  • Nickel-plated brass is the best plating-alloy for corrosion-resistance.
  • RP-TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. RP-TNC's screw-down connector performs better than BNC in the microwave spectrum.
  • RP=Reverse Polarity. Gender of RP-TNC is counter-intuitive: Click for details .

Compatibility with wireless applications: Our antenna cable's range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

ROHS & REACH compliant: All of our antenna cables and adapters are in compliance regarding content of toxic materials restricted by RoHS 3 and REACH.

Directory of other RP-TNC cable types

RP-TNC male to female extension cable is easy and quick to install: The RP-TNC male connector fits the jack on wireless routers, and the RP-TNC female connector fits the male connector on antennas with an RP-TNC male connector: Most wireless antennas with an RP-TNC connector have a male connector. The extension cable enables placing the antenna further from the router, in the most suitable place for line of sight.

COMPATIBILITY: RP-TNC male connector fits older LinkSys & Cisco wireless routers, as well as other items that have a RP-TNC jack/connector.

Write a Review