RP-SMA Extension Cable: 4FT, 5FT Male to Female Extender Outdoor Indoor
- SKU:
- RSm4ftRSf100
- Availability:
- In stock
- Weight:
- 0.09 LBS
Data Alliance
RP-SMA Extension Cable
RP-SMA female to male Antenna Cable Extender:
- One end has a RP-SMA female right-angle and the other has a RP-SMA-male right-angle connector with bulkhead nut & washer for mounting and weatherproofing.
- The cable length stated in the length options is the length between the connectors.
- The connectors are straight RP-SMA-male and straight RP-SMA female connector with bulkhead.
- Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Cable is double-shielded, low-loss and very flexible/easily bendable coax with black jacket. The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
We offer two options of thickness of cable (both are double-shielded):
- The LMR-100 equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. Recommended maximum bend radius is 1.1 inches (28mm).
- The LMR-200-equivalent cable-type is equivalent or better than LMR200: Has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.
- See comparison of LMR-100 and LMR-200 attenuation (signal loss).
The temperature range for operational use of these cable assemblies are as follows:
- Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
- Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
RP-SMA female connector includes a bulkhead nut and washer for mounting & waterproofing:
- This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
- Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
- The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure
The version of the RP-SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some cable versions on this page, and others by special order. | The longer RP-SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some cable versions on this page, and others by special order. |
Compatibility with wireless standards & applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax, 5G: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors
Our RP-SMA extension cables' range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.
ROHS 3 and REACH: All of our antenna cables are compliant with ROHS 3 and REACH restrictions on content of lead, other heavy metals and toxic materials.
RP-SMA male to female extension cable is easy and quick to install: The RP-SMA male connector fits the jack on most WiFi routers, and the RP-SMA female connector fits the male connector on antennas with an RP-SMA male connector: Most WiFi antennas with an RP-SMA connector have a male connector. The extension cable enables placing the antenna further from the router, in the most suitable place for line of sight.
Data Alliance
RP-SMA Extension Cable: 4FT, 5FT Male to Female Extender Outdoor Indoor
1 Review
-
sturdy wire
Impressed with quality of food his wire. Ends are good quality and cable seems sturdy while being flexible