RBD53iG-5HacD2HnD-US 2.4/5GHz hAP ac3 3/5.5dBi - Mikrotik


In stock
1.00 LBS

hAP ac³ is the new standard of home access points.

Now forget about endless searching for the perfect router and scrolling through an eternity of reviews and specifications! We have Mikrotik single affordable home access point that has all the features you might need.

With 5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac³ can satisfy even the biggest and most demanding households in recent years. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included.

It comes with a free handy tool for centralized management of all wireless MikroTik devices – the CAPsMAN. Unlike traditional controller software, CAPsMAN doesn’t require a separate device to run, it can use any existing RouterOS device in your network.

Data Alliance offers both the US version and World Version (ROW version) of MikroTik RBD53iG-5HacD2HnD. By default, if you are in the United States, we will ship the US version.

Included Parts:

CPU 4 core IPQ-4019 716 MHz
Number of 1GbE Ports 5
Number of 1GbE Ports with PoE-out 1
Size of RAM 256
Size of NAND 128 MB
Wireless 2.4 GHz 802.11 b/g/n dual-chain,
5 GHz 802.11 a/n/ac dual-chain
Wireless Regulations Specific frequency range and power will be limited by country regulations
Wireless Antenna Max Gain 2.4 GHz (3 dBi), 5 GHz (5.5 dBi)
Antenna Beamwidth 360°
Dimensions 251 x 129 x 39 mm
Operating System RouterOS, License level 4
USB Port 1 USB 2.0 Port Type A
Operating Temperature -40°C to +70°C
Certification CE, FCC, IC


PoE-in Passive PoE
PoE-out * Passive PoE
Supported Input Voltage DC Jack (12 - 28 V) PoE-in (18-28 V)
Power Adapter Nominal Voltage 24 V
Power Adapter Nominal Current 1.5 A
Max Out Per Port Output (input < 30 V) 0.5 A
Max Power Consumption without Attachments 12 W
Max Power Consumption 30 W

*If PoE-out used, then input voltage (DC jack, PoE-in) should be > = 24 V

Rate (2.4 GHz) Tx (dBm) Rx (dBm)
1Mbit/s 25 -100
11Mbit/s 25 -94
6Mbit/s 26 -96
54Mbit/s 23 -78
MCS0 26 -96
MCS7 22 -73


 Rate (5 GHz) Tx (dBm) Rx (dBm)
6MBit/s 26 -96
54MBit/s 22 -80
MCS0 26 -96
MCS7 21 -75
MCS9 19 -70
Write a Review