N-male to N-male: 1-FT, 18-inch, 2FT, 3FT, 6.5FT, 10FT Outdoor Indoor

N-male to N-male Cable

Antenna Cable: N-type male connector on both ends

• Cable options are very low signal-loss, double-shielded, for outdoor or indoor.
• Choose from 1-Foot, 18-inch, 2-Foot, 3 FT, 6.5 FT, 10FT options on this page, above.
• We carry many other length options of N-male to N-male cables and N-extension cables
• The length refers to the length of the cable between the connectors (not including the connectors).
• This cable is rated for outdoor use and is also suitable for indoor use.
• See our mounts for antennas with N-female connectors.
• The length refers to the length of the cable between the connectors (not including the connectors).
• Allows interconnection of devices with N female interfaces: Antennas, antenna cables and wireless devices.
• For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
• Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

We offer three options of thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:

• 400-series coaxial cable-type (equivalent to LMR-400) has much lower attenuation (signal loss) than 200-series.
• 200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
• 100-series coaxial cable type is equivalent or better than LMR-100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.
• 100, 200 & 400 -series are rated for outdoor use and are also suitable for indoor use.
• Double-shielding of 100-sereis, 200-series and 400-series enables low signal loss. Both are flexible/easily bendable (200-series is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
• Both coax options have a black PVC jacket.

The temperature range for operational use of these cable assemblies are as follows:

• Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
• Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
• Cables with 400-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

N-Type Male Connector Materials Composition:

• The materials composition is oriented to ensure a durable, weatherproofconnection
  • Connector Body: Nickel-Plated Brass:  The most corrosion-resistant of all plated brass alloys (better than gold-plated), for long-term outdoor exposure.
  • Our standard nickel-plated connectors: The standard is that the connector can resist 70 hours salt spray test without any corrosion-defect.
  • For corrosion-resistance of 120 hours in a salt spray test: We have to customize the connector. No tooling cost, but it adds an additional 4 weeks delivery time and the product cost will be 20% higher than the standard cable assembly.
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plate
• Insulators: PTFE
• The N-male connector has an internal rubber O-ring. When connected to an N-female connector with a rubber o-ring (at an enclosure port) it provides a water-tight seal rated IP-67 (based on use with Data Alliance’s N-female connectors with a rubber o-ring).

• The N (male) connector is knurled.
• N-male inside diameter is 0.620-inch (1.57 cm)

Frequency Bands & Electrical Characteristics

• This antenna cable’s rated range of frequency band compatibility is from 900GHz to 6GHz)
• Impedance Matching: 50 Ohms
• Capacitance: Approximately 24.5 pF/ft (80.3 pF/m)
• Attenuation (signal loss):

o   At 900 MHz:  0.33 dB/m. (0.09 dB/ft.)

o   At 2400 MHz:  LMR-200 = 0.54 dB/m. (0.12 dB/ft.)

o   At 3500 MHz:  LMR-200 = 0.67 dB/m. (0.21 dB/ft.)

o   At 5800 MHz:  LMR-200: 0.87 dB/m. (0.264 dB/ft.)

Compatibility with Wireless Standards & Applications

• Compatible with all WiFi standards: 2.4GHz or 5GHz applications:  Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AX, 802.11AC, and earlier Wi-Fi standards:  802.11N, G and B.
• Cellular Wireless  LTE / 4G, LTEm, GSM / 3G, 5G, WiMax
• IOT (Internet of Things) wireless protocols:  Bluetooth, ZigBee, LoRa, M2M, RFID, NB-IoT.

N-Type Male Connector Dimensions & Other Characteristics

• N-male inside diameter is 0.620-inch (1.57 cm).
• N-connector gender is counter-intuitive: Click here for details.  Gender refers to the pin inside and not the threads.
• N-Type connector is the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

RoHS 3 and REACH compliant: Our antenna cables and RF adapters are compliant with RoHS 3 and REACH restrictions for content of lead and other heavy metals and toxins.

Conflict Minerals Compliance:  This antenna cable is compliant with Conflict Minerals RMI CMRT 6.31.