N Extension Cable: 25-FT, 30-FT, 35-FT. N-male To N-female. Low Loss

$15.67
SKU:
Nm25ftNf200
Brand:

Availability:
In stock
Weight:
0.67 LBS

N-male To N-female Extension Cable

Antenna Cable: N-type male connector on one end and an N-female connector on the other end.

  • Related cables: Shorter N-extension cables and N-male to N-male cables of various lengths.
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with N-female and N-male interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), c oaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

We offer two options of thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:

  • 400-series coaxial cable-type (equivalent to LMR-400) has much lower attenuation (signal loss) than 200-series.
  • 200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
  • In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
  • Double-shielding of both 200-series and 400-series enables low signal loss. Both are flexible/easily bendable (200-series is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
  • Both coax options have a black PVC jacket.

N-type extension cables coaxial cable types LMR-200, LMR-400 and RG-58 comparison of shielding, attenuation, diameter, bend radius and other specifications.

The temperature range for operational use of these 200-series and 400-series cable assemblies is as follows: -31 F ~ +203 F (-35 C ~ +95 C)

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

N-type Connector Characteristics and Details: Durable, weatherproof connection

N-female connector with embedded o-ring

  • The N-female-bulkhead connector has a rubber O-ring, which provides a water-tight seal when installing in an enclosure port.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
  • N materials composition:
  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Compatibility with wireless applications:

Our N-type cables range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the above applications.

RELATED PRODUCTS

Write a Review