MMCX to SMA-female Cable: 2-inch 3" 4" 5" 7" 9" 10" 1FT 14" 16" 18" 20" 24"

SMA-female to MMCX to Cable:  2-inches to 2FT

Cable / Adapter with MMCX right angle and SMA-female (bulkhead) connectors. The length refers to the cable size between the connectors (not including the connectors).

In addition to the versions with MMCX-right-angle,  We also have MMCX-straight (male) to SMA-female. For these versions, please contact Customer Service. 

• With an 8-inch cable:  Part# MMCXm8iSf100.  
• With a 12-inch cable:  Part# MMCXm12iSf100.  

Compatibility with wireless applications: our MMCX to SMA cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables makes them compatible and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications
• IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.

The cable is double-shielded for low signal loss and is very flexible/easily bendable. The coaxial cable type is similar to LMR-100 but better quality than LMR-100: Coax with a black jacket has the same or better signal loss per meter and flexibility as LMR100 and less attenuation (signal loss) than RG174. Double-shielding is a significant factor in this cable's higher quality, translating into lower loss/better performance. The cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use.

The temperature range for operational use of this 100-series coax and the cable assembly is -22 F ~ +185 F (-30 C ~ +85 C)

SMA Connector Characteristics and Details

• SMA female connector includes a bulkhead nut and washer:
• This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection) or mount the connector on a case, panel, or Printed Circuit Board (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted by placing an O-ring between the enclosure wall and the bulkhead nut & washer on the female connector.
• All our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.
• Our standard SMA-female connector (threaded part) is 3/8 inches long. We also offer a more extended option: 14.5mm. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.

• SMA Features and Key Information, including dimensions and materials composition

• SMA Gender Determination: Key Point
  • SMA gender is counter-intuitive: Please observe the picture & note it is correct.
  • The gender refers to the pins inside--not the threads. SMA male has threads on the inside.
  • More details regarding SMA gender determination.

MMCX Male Right-Angle Connector:

• Features a lock-snap mechanism which makes it possible to rotate 360 degrees
• Designed to terminate with RF coax cable types, including 1.13 coax, RG174, RG-316, RG188, or equivalent coaxial cables
• Impedance: 50 ohms
• Many GPS modules have MMCX jacks. Also, miniPCI wireless cards.

MMCX Connectors' Materials Composition

• Connector Body: Gold-Plated Brass
• Center Contact: Phosphor Bronze, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE, Teflon

ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and other toxic materials restricted by RoHS 3 and REACH.

Data Alliance's high-quality soldered terminations of MMCX and SMA connectors provide a low-loss connection with minimal discontinuities.

RELATED PRODUCTS & INFO:

• MMCX to RP SMA Cables
• MMCX to SMA Cables