Antenna Dual-Band 2dBi 2.4GHz / 5GHz Omnidirectional: RP-SMA


In stock
0.07 LBS
Bulk Pricing:
Buy in bulk and save
Dual Band Antenna Omni Directional with RP-SMA (male) connector.
  • Sends WiFi / wireless signal high and low enough to reach 2 levels of a building.
  • Omni dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it
  • Mounts directly onto RP-SMA-female or SMA-female connector of radio or client device
  • Bottom section of "right angle" version has articulating angle that can be adjusted to 90-degrees or other angle.
  • Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks. Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.
  • Frequencies:
    • 2.4GHz ~ 2.5GHz: Gain: 2dBi
    • 4900MHz ~ 5824MHz: Gain: 3dBi  [4.9GHz to 5.825GHz]
  • V.S.W.R: <=2.0:1 This low V.S.W.R is indicative of an efficient, high-performance antenna
  • Impedance: 50 ohms
  • Connector: RP-SMA Male
  • Dimensions: L200 x W13.7 x H13.7mm
  • Operating temperature range: -40 to 85 °C
  • Vibration: 10 to 55Hz with 1.5mm amplitude 2hours
  • Polarization: Linear
  • Max Power: 50W

Compatibility with wireless standards & applications: This omni directional dual band antenna's range of frequency band compatibility in the 2.4GHz and the 5.8GHz frequencies, its low broadband VSWR at < 2.0, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

ROHS Complaint: The entire product is ROHS compliant (connector and antenna).

RP-SMA Characteristics:


Write a Review