CAT6a Cable STP Outdoor Rated, Foil-Shielded: 1FT, 10FT, 15FT, 20FT, 25FT, 35FT, 50FT, 75FT Ethernet Network

$3.79
SKU:
NC1C6a
Brand:

Weight:
0.08 LBS
CAT6a Shielded Network Cable with snagless boot

Shielded CAT-6a cables will retain a high quality signal when passing near/parallel to high voltage or power cables.

Our CAT6a cables are 100% tested for performance and continuity in accordance with industry standards.

Molded, snagless boot. The RJ45 connector is shielded with metal.

  • Color: Gray
  • Wire: 24 AWG
  • Shield Type: foil
  • Fully Shielded to Reduce Interference

For use with Access Points outdoors: Ubiquiti recommends only shielded (STP) outdoor-rated 
CAT5e cable, and specifically recommends against using unshielded (UTP).

Gray 25 foot snagless Cat6a cable is ideal for situations with higher environmental noise than normal.

Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications.

Cable has molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

For use with Access Points outdoors:

Ubiquiti recommends only shielded (STP) outdoor-rated CAT6a cable, and specifically recommends against using unshielded (UTP).

 

Write a Review