RP-SMA male To RP-SMA female Right-Angle (bkd) Cable: 3-inch, 4-in, 6-in, 8-in, 10-in, 1FT, 14-in, 16-in, 18-in, 20-in, 22-in, 2FT, 26-inch

$4.04
SKU:
RSm3iRSfRA100
Brand:

Availability:
In stock
Weight:
0.04 LBS

RP-SMA Male To RP-SMA Female Right-Angle Cable

RP-SMA female Right-Angle to RP-SMA male (regular straight type): Double-shielded antenna cable

The length refers to the length of the cable between the connectors (not including the connectors).

One end has an RP-SMA-female right-angle type connector with bulkhead mount (nut and washer), and the other end has an RP-SMA-male connector, regular straight type.

Cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR-100, and less attenuation (signal loss) than RG174. The higher quality of this antenna cable coax translates into lower loss/better performance. Coax is rated for outdoor use and is also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

Comparing Radio, attenuation, diameter of LMR-100 and RG-174 coaxial cable type.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

RP-SMA female (right angle) connector includes a bulkhead nut and washer:

  • This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
  • Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
  • The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The 21-inch version on this page has the longer 14.5mm RP-SMA female.

Torque ratings RP-SMA Male to Right Angel RP-SMA Female

Compatibility with wireless standards & applications: Our RP-SMA extension cables range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the following applications:

ROHS 3 and REACH: In compliance for content of lead, other heavy metals and toxic materials that are restricted by RoHS 3 and REACH.

RP-SMA male to female extension cable is easy and quick to install: The RP-SMA male connector fits the jack on most WiFi routers, and the RP-SMA female connector fits the male connector on antennas with an RP-SMA male connector: Most WiFi antennas with an RP-SMA connector have a male connector. The extension cable enables placing the antenna further from the router, in the most suitable place for line of sight.

Write a Review