RP-SMA male To RP-SMA female Right-Angle (bkd) Cable: 3-inch, 4-in, 6-in, 8-in, 10-in, 1FT, 14-in, 16-in, 18-in, 20-in, 22-in, 2FT, 26-inch

RP-SMA Male To RP-SMA Female Right-Angle Cable

RP-SMA female Right-Angle to RP-SMA male (regular straight type): Double-shielded antenna cable

The length refers to the cable size between the connectors (not including the connectors).

One end has an RP-SMA-female right-angle type connector with bulkhead mount (nut and washer), and the other end has an RP-SMA-male connector, regular straight type.

Our cable is not just any cable. It's double-shielded, low-loss, and incredibly flexible. Its quality is equivalent to or better than LMR-100: Coax with a black jacket, boasting the same or better signal-loss-per-meter and flexibility as LMR-100LMR-100: Coax with a black coat and less attenuation (signal loss) than RG174. This superior quality translates into lower loss and better performance. Rated for outdoor use and suitable for indoor use, it's a cable you can trust. The recommended tightest continuous bend radius is 1.1 inches (28mm).

The temperature range for operational use of this 100-series coax and the cable assembly is -22 F ~ +185 F (-30 C ~ +85 C)

RP-SMA female (right angle) connector includes a bulkhead nut and washer:

• This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection) or on a case, panel, or Printed Circuit Board (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted by placing an O-ring between the enclosure wall and the bulkhead nut & washer on the female connector.
• The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option, 14.5mm, which is available. The 21-inch version on this page has the longer 14.5mm RP-SMA female.

• SMA Dimensions
• SMA connector material composition
• SMA features and critical information

Compatibility with wireless standards & applications: Our RP-SMA extension cables' range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables makes them suitable and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications
• IoT wireless & M2M: Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
• Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners, and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors

ROHS 3 and REACH: We comply with the content of lead, other heavy metals, and toxic materials restricted by RoHS 3 and REACH.

The RP-SMA Male to RP-SMA Female Right-Angle Cable is designed for easy and quick installation. The RP-SMA male connector is compatible with the jack on most WiFi routers, while the RP-SMA female connector fits the male connector on antennas with an RP-SMA male connector. This means most WiFi antennas with an RP-SMA connector have a male connector. The extension cable allows the antenna to be placed further from the router, ensuring the most suitable place for line of sight.