N-male To RP-SMA male Cable: 2-FT LMR200 & LMR400 coax options

$5.49
SKU:
Nm2ftRSm200
Brand:

Availability:
In stock
Weight:
0.21 LBS

N-male To RP-SMA male Cable

Antenna Cable with RP-SMA male connector on one end and an N-male connector on the other end.

  • We stock many more RP-SMA-male to N-male cable options.
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with RP-SMA female and N-female interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), c oaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of Type-N and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

We offer two options of thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:

  • 400-series coaxial cable-type (equivalent to LMR-400) has much lower attenuation (signal loss) than 200-series.
  • 200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
  • In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
  • Double-shielding of both 200-series and 400-series enables low signal loss. Both are flexible/easily bendable (200-series is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
  • Both coax options have a black PVC jacket.

Composition-diameter-coax-cable-types-LMR100-LMR200-LMR400

The temperature range for operational use of these 200-series and 400-series cable assemblies is as follows: -31 F ~ +203 F (-35 C ~ +95 C)

N-male Connector Characteristics and Details: Durable, weatherproof connection

  • The N-male connector has an interior rubber O-ring, which provides a water-tight seal.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • The N-male connector is knurled.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition:

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

RP-SMA Connector Characteristics and Details

  • RP-SMA Gender Determination: Key Points
    • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

Compatibility with wireless applications:

Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR , and impedance matching to 50 Ohm gear , makes them compatible and compliant for all the above applications.

N-male-Material-composition

RELATED PRODUCTS

Write a Review