N-female To RP-SMA male Right-Angle Cable: 28-inch: Outdoor / Indoor

$7.59
SKU:
Nf28iRSmRA200
Brand:

Availability:
In stock
Weight:
0.28 LBS
N-female connector with o-ring for weatherproofing to RP-SMA male right-angle. Coaxial cable type is LMR-200, which is a very low loss coax.

N-female To RP-SMA male Right-Angle Cable

RP-SMA male right-angle To N (female) Cable:

Antenna Cable Coax is double-shielded for low signal loss but is very flexible. It has a black PVC jacket.

  • The cable-type is 200-series, which is equivalent to LMR-200 in quality
  • Has the same or better signal-loss-per-meter (attenuation) and flexibility as LMR200, and much less attenuation (signal loss) than RG58.
  • The double-shielding is a major factor in the higher quality of this cable, which translates into lower signal loss/better performance.
  • Rated for outdoor use and are also suitable for indoor use.
  • Cable is very flexible/easily bendable coax.
  • See comparison of 200-series to 100-series attenuation (signal loss).

Characteristics comparison RG-58, LMR100, LMR200

The temperature range for operational use of this 200-series coax and the cable assembly, is: -31 F ~ +203 F (-35 C ~ +95 C)

N-female Connector Characteristics and Details: Durable, weatherproof connection

  • The N-female-bulkhead connector has a rubber O-ring, which provides a water-tight seal when installing in an enclosure port.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

RP-SMA Connector Characteristics and Details

N-female connector with embedded o-ring

  • RP-SMA Gender Determination: Key Points
    • RP-SMA gender is counter-intuitive: Please observe picture & note it is correct.
    • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
    • More details regarding RP-SMA gender determination.

Compatibility with wireless applications:

Our N-female to RP-SMA antenna cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the above applications.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

 

Material-Composition-N-type-connectors

 

RELATED PRODUCTS

Write a Review