MMCX To RP-SMA-female Cable: 2-in, 4-in, 5-in, 7-in, 10-in, 1-FT, 14-in, 16-in, 18-in, 22-in

MMCX To RP-SMA-female Cable

Antenna cable: MMCX connector with right-angle to RP-SMA-female (bulkhead): The length refers to the length of the cable between the connectors (not including the connectors).

See other lengths of MMCX cables with male RP-SMA

The cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness, and is rated for outdoor use and is also suitable for indoor use.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

For all wireless / WiFi applications, including Bluetooth, ZigBee and Cellular, and 802.11N, 802.11G, 802.11B, 802.11AC, 802.11A, WiMAX, 3G & 4G. 2.4GHz or 5GHz applications

RP-SMA female connector includes a bulkhead nut and washer:

• You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Bard (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
• The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which we can use for special orders.

The version of the RP-SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some cable versions on this page, and others by special order.	The longer RP-SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some cable versions on this page, and others by special order.

• RP SMA Dimensions

RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.

• RP SMA Connector Material Composition

Lead-free and compliant with RoHS and REACH: All of our antenna cables and RF adapters are RoHS compliant and REACH compliant.

Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

COMPATIBILITY

• MMCX connector is compatible with (fits) various Router Boards, WiFi cards & GPS units that have an MMCX antenna jack
• Gender of RP-SMA-connector is counter-intuitive. RP-SMA female connector is also called "RP-SMA jack".

RELATED PRODUCTS & PAGES:

• MMCX to N Cables
• MMCX to RP SMA Cables
• MMCX to SMA Cables
• Antenna jacks of miniPCI cards & Router Boards
• RP-SMA adapters
• RP SMA right angle adapters and cables
• RPSMA extension cables
• RPSMA male to male antenna cables