BNC male to RP-SMA male Adapter Connector 50 Ohm

$3.50
SKU:
BmRSm
Brand:

Availability:
In stock
Weight:
0.07 LBS
BNC male to RP-SMA male Adapter Connector

BNC male to RP-SMA male Adapter Connector 50 Ohm

Adapter: BNC male to RP-SMA male:

One end has a BNC male connector and the other end has a RP-SMA male connector.

  • Related adapters: Adapters with BNC connectors
  • Allows interconnection of devices with RP-SMA female and BNC female interfaces: Antennas, antenna cables and wireless devices.
  • Use for Coaxial extension, coaxial interface conversion, coax retrofit applications.
  • Nickel-plated brass body for enhanced corrosion resistance: This is the most weather-resistant, corrosion-resistant plating.
  • Gold plated center contact for reduced signal loss.

Compatibility with wireless standards and applications:

This antenna cable adapter's range of frequency band compatibility (from 0 to 18GHz) and 50 Ohms impedance matching, makes them suitable and compliant for all the above applications.

BNC: Round connector with slotted mating collar. Quick-disconnect connector for coaxial cable: It is not only used for Wireless Antenna extensions, but also for video, audio, and networking coax applications.

RP-SMA Connector Characteristics and Details

  • RP-SMA male and female diameter:
    • RP-SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).
    • RP-SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
  • RP-SMA Gender Determination: Key Points
    • RP-SMA gender is counter-intuitive: Please observe picture & note it is correct.
    • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
    • More details regarding RP-SMA gender determination.
  • RP-SMA-Connector Materials Composition: 
    • Connector Body:
      • All the cables on this page that are made with 400-series coax have connectors that are nickel-plated brass (on the connector body).
      • All the cables on this page that are made with 200-series coax have connectors that are gold plated brass (on the connector body).
    • Center Contact: Beryllium Copper, Gold Plated
    • Crimp Ferrule: Copper, Nickel Plated
    • Insulators: PTFE
    • Precision machined for low loss in ISO 9001 facilities
    • Other RP-SMA Characteristics and Key Points
      • RP-SMA-male is also called "plug" and SMA female connector is also called "jack"
      • We offer anRP-SMA wrench to assist in installing antennas, cables and adapters with RP-SMA or SMA connector(s).
      • RP-SMA-male connector fits items that have an SMA-female connector.
      • RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
      • RP-SMA connectors are not compatible with the common, commercially available Type F coaxial connector. Type F connectors look similar but are of slightly different size and will not pair with RP-SMA or SMA connectors without an adapter.

Insertion loss: 0.26 dB maximum

RELATED PRODUCTS

ROHS 3 and REACH compliant: The entire product is ROHS 3 compliant and free of lead and other heavy metals.

BNC cables for Video and Audio are 75 Ohm: See our BNC cables for Video and Audio:

BNC cables for wireless applications are 50 Ohm:

Gender of RF connectors is counter-intuitive: Read more about this

Write a Review