Antenna LTE 4G LoRa 800MHz - 2800MHz Directional Yagi 11dBi w/ N-f

$49.99
SKU:
A828Y11
Brand:

Availability:
In stock
Weight:
2.00 LBS

Antenna LTE 4G LoRa Helium

LTE 4G directional antenna with multiband frequency range from 800 to 2800MHz. 11dBi

  • Directional Cone Yagi design radiates signal pattern in the direction in which antenna is pointed, but with a wide beam: See radiation pattern in the images. Directional antennas have less interference than omni-directional antennas because they focus signal in a single direction, thereby eliminating much of the signal noise.
  • For LoRa / LoraWAN, Helium This antenna is a solid performer in the 850-920MHz band for Helium miners and LoRaWAN access points. The wide frequency range does not inhibit the performance in the 850-920MHz band: The fact of it having a wide frequency band is of no significance because it performs so well in the 850-920MHz band.
  • Also suitable for GSM, ZigBee, and any other wireless protocol that uses a frequency in the 850-920MHz band. T
  • See all 900MHz Antenna options: LoRa, Helium, LoRaWAN, GSM, 3G options
  • Pole-mountU-bolt assembly included.
  • Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Compatibility with wireless standards & applications:

This directional Yagi antenna's range of frequency band compatibility in the 800 MHz to 2800 MHz frequency band range, its very low broadband VSWR at 1.6, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Specifications
Antenna Type Yagi: Directional
Frequency Range-MHz 800-2800
Gain-dBi 11dBi
VSWR =1.6
Polarization Linear Vertical
F/B Ratio-dB =20
Horizontal Beamwidth ° 50-65 degrees
Vertical Beamwidth° 40-50 degrees
Max power-W 50 watts
Nominal Impedance-O 50 Ohms
Lightning protection DC Grounded
Mechanical Specifications
Connector­­­ N Female
Dimensions

L445×H210×W65 mm
17.5 x 8.23 x 2.6 in

Weight-kg 1
Radome Material ABS
Mast Diameter-mm F40 to 50
Operating temperature -40~+65
Rated Wind Velocity-m/s 60

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

N-type female Connector Characteristics and Details: Durable, weatherproof connection

N materials composition:

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review

1 Review

  • 5
    Just awesome

    Posted by Clement Lesne on 3rd Feb 2021

    Used for LoRa network, just awesome. Or too big, fantastic coverage. Thank you.

Videos Hide Videos Show Videos