SMA-male To SMA-female Panel-Mount Jack: 12 inch Antenna Cable
- SKU:
- Sm12iSfP
- Availability:
- In stock
- Weight:
- 0.05 LBS
Data Alliance
SMA-male To SMA-female Panel-Mount Jack
For the SMA-male end (which is not the panel-mount end): You have the option of a straight or right-angled SMA male connector.
SMA cable for antenna: Cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.
The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)
Compatibility: This SMA extension cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them suitable and compliant for all the following applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax 5G: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors .
ROHS & REACH compliant: The entire product (connectors and cable) is free of heavy metals and compliant with ROHS and REACH.
SMA Connector Characteristics and Details
- SMA female connector includes a bulkhead nut and washer:
- This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
- Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
- All of our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.
- The length of our standard SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
 |
 |
| The version of the SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some of our "stocked" SMA cable versions, and others by special order. | The longer SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some of our "stocked" SMA cable versions, and others by special order. |
SMA-male has a pin inside the connector body
- SMA-female connector fits items that have an SMA (female) jack/connector.
- SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. SMA male has threads on inside.
- SMA female connector is also called "jack" and SMA-male is also called "plug."
- SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
- We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
- Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
RELATED PRODUCTS
