N-male To RP-SMA male Cable: 3FT, 5FT, 6FT Low-Loss Outdoor Indoor

$4.80
SKU:
Nm1mRSm
Brand:

Availability:
In stock
Weight:
0.20 LBS

N-male To RP-SMA male Cable

Antenna Cable with RP-SMA connector on one end and an N-male connector on the other end.

  • We stock many more RP-SMA-male to N-male cable options
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with RP-SMA female and N-female interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of Type-N and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

We offer two options of thickness of cable (both are double-shielded, with a black jacket):

LMR100, LMR200 and LMR400 Bend radius

The temperature range for operational use of these cable assemblies are as follows:

  • Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
  • Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
  • Cables with 400-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

Compatibility with wireless applications: Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the following applications:

N-male Connector Characteristics and Details: Durable, weatherproof connection

  • The N-male connector has an interior rubber O-ring, which provides a water-tight seal.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • The N-male connector is knurled.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition:

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

RP-SMA Connector Characteristics and Details

  • RP-SMA Gender Determination: Key Points
    • RP-SMA gender is counter-intuitive: Please observe picture & note it is correct.
    • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
    • More details regarding RP-SMA gender determination.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

 

N-type-male-Material-composition

 

RELATED PRODUCTS

Write a Review

1 Review

  • 5
    LOWER LOSS!

    Posted by Unknown on 26th Apr 2017

    Brings up you signal level.