MMCX right-angle to N-female (bkd) Cable: 6-inch, 8-inch, 9-inch, 12-inch

MMCX right-angle to N-female Cable

ANTENNA CABLE ASSEMBLY: MMCX CONNECTOR To N female (bulkhead)

Connect wireless card with MMCX jack to N-connector on antenna. MMCX connector snaps into MMCX jack on Ubiquiti & MikroTik cards.

Data Alliance's high-quality soldered terminations of MMCX and Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

See other variations of MMCX to N Cables

One end has MMCX right-angle connector and the other end has a standard N-female connector.

MMCX Male Connector:

• Center Contact: Phosphor Bronze, Gold Plated
• Connector Body: Brass, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

N is the largest of RF connector types, and very common to see on large antennas (most large antennas have an N-female connector).

• The N-female-bulkhead connector has a rubber O-ring, which provides a water-tight seal when installing in an enclosure port.
• N-Female diameter is 0.620-inch (1.57 cm)
• N-type connectors are usually rated up to 12.5GHz, making them usable in not just WiFi applications, but also in the higher end of the microwave spectrum.
• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

Connectors are precision machined and gold-plated for low loss.

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

For 802.11N, 802.11G, 802.11B, 802.11AC, 802.11A, WiMAX, 3G & 4G. 2.4GHz or 5GHz applications. (WiFi Network Standards)

Lead-free and compliant with RoHS and REACH: All of our antenna cables and RF adapters are RoHS compliant and REACH compliant.

COMPATIBILITY:

MMCX connector is compatible with (fits) all WiFi cards with MMCX antenna jack.

N-connector gender is counter-intuitive: Click Here for Details

RELATED PRODUCTS:

• MMCX to RP-SMA Cables
• MMCX to SMA Cables