MCX to RP-SMA-female Cable: 8-inch, 10-inch, 12 inch, 14-inch, 18-inch

$5.15
SKU:
MCXra8iRSf
Brand:

Availability:
In stock
Weight:
0.03 LBS

MCX to RP-SMA-female Cable

Cable: MCX connector To RP-SMA female bulkhead: One end has an MCX (right angle) connector and the other end has an RP-SMA-female connector with bulkhead mount.

Cable is double-shielded, low-loss and very flexible/easily bendable. The cable type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

MCX to RP-SMA-female LMR-100 RG-174 coax types cable comparison.

MCX connector is compatible with (fits) all devices with an MCX antenna jack: This includes some Android PCs.

RP-SMA = Reverse Polarity SMA. RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas, including wireless / WiFi networks, BlueTooth, ZigBee, Cellular voice & data, and WiMax: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

RP-SMA female connector is also called "jack." RP-SMA female connector includes a bulkhead nut and washer, which can be used to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).

The length of our standard RP-SMA female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which we can use for special orders.

RP-SMA Female Version Options RP-SMA Elongated
The version of the RP-SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some cable versions on this page, and others by special order. The longer RP-SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some cable versions on this page, and others by special order.

 

Lead-free and ROHS compliant: The entire product is ROHS compliant (connectors and cable).

RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas, including WiFi & WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

MCX (micro coaxial) connectors are coaxial RF connectors that have a snap-on interface and a 50 Ohm impedance. They offer broadband capability from DC to 6 GHz. The contact surfaces are gold-plated. They have the same inner contact and insulator dimensions as the SMB connector but are 30% smaller.

  • MCX (micro coaxial) connectors are coaxial RF connectors that have a snap-on interface and a 50 Ohm impedance. They offer broadband capability from DC to 6 GHz. The contact surfaces are gold-plated. They have the same inner contact and insulator dimensions as the SMB connector but are 30% smaller.
  • MCX is the external antenna port for Apple Airport Extreme Base Station. MCX and the smaller MMCX version are frequently used to connect external antennas to GPS receivers. They are also common on USB DVB-T tuners for computers and laptops, to connect an external antenna to the tuner.
  • The outer diameter of the MCX male is approximately 3.6 mm or 0.140 inch. MCX male is also called MCX plug.
Write a Review