MCX to SMA female (straight) or Male Right-angle Cable: 3-inch, 6-inch

MCX to SMA female (straight) or Male Right-angle Cable

Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of ourantenna cables and adapters with SMA-male connectors .

• Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance.
• MCX (micro coaxial) connectors are coaxial RF connectors that have a snap-on interface and a 50 Ohm impedance. They offer broadband capability from DC to 6 GHz. The contact surfaces are gold-plated. They have the same inner contact and insulator dimensions as the SMB connector but are 30% smaller.
• MCX is the external antenna port for Apple Airport Extreme Base Station. MCX and the smaller MMCX version are frequently used to connect external antennas to GPS receivers. They are also common on USB DVB-T tuners for computers and laptops, to connect an external antenna to the tuner.
• The outer diameter of the MCX male is approximately 3.6 mm or 0.140 inch. MCX male is also called MCX plug.
• SMA is a round screw-type connector, that is rated for frequencies from the lowest up to 18GHz: This antenna cable is suitable for wireless / WiFi & WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

SMA female connector includes a bulkhead nut and washer:

• You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Bard (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
• The length of our standard SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which we can use for special orders.

The version of the SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some of our "stocked" SMA extension cable versions, and others by special order.	The longer SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some of our "stocked" SMA extension cable versions, and others by special order.

• SMA Dimensions
• SMA Connector Material Composition

Lead-free and ROHS compliant: The entire product is ROHS compliant (connectors and cable).

Data Alliance's high-quality soldered terminations of MCX and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.