RP-SMA-male-right-angle To RP-SMA-female-right-angle Cable: 3-inch, 4-in, 5-in, 6.5-in, 8-in, 9-in, 10-in, 12-in, 14in, 16in

RP-SMA-male-right-angle To RP-SMA-female-right-angle Cable

• Similar cables w/ RP-SMA connectors w/ right-angle (including other lengths of this cable)
• The female end is an extended-version of RP-SMA-female (bulkhead type: 15mm with about 20 threads.
• Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RP-SMA female connector includes a bulkhead nut and washer:

• You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Bard (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
• The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches (9.525mm). We have a longer option: 14.5mm, which we can use for special-order cable requests. Our 9-inch and 10-inch options on this page has the longer 3/8 inches (9.525mm) connector.
• All of our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.

• RP SMA Dimensions

Lead-free and compliant with RoHS and REACH: All of our antenna cables and RF adapters are RoHS compliant and REACH compliant.

Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors

Impedance-matched to 50 ohm antennas and cables.

RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas , including wireless / WiFi networks, BlueTooth, ZigBee, Cellular voice & data, and WiMax: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

• RP SMA Connector Material Composition

Cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR-100, and less attenuation (signal loss) than RG174. The higher quality of this antenna cable coax translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use. Impedance is 50 Ohms.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

Gender of RP-SMA is counter-intuitive in two ways:

1. The gender is referring to the pins inside-not the threads. RP-SMA male has threads on inside.
2. "RP" stands for reverse polarization: The pins are female when they appear to be male, and vice versa.

RELATED PRODUCTS:

• RP-SMA extension cables
• RP-SMA male to male antenna cables