RP-SMA male Right Angle To RP-SMA female (straight) Cable: 3-inch, 4-in 6-in, 8-in, 10-in, 1FT, 14-in, 16-in, 18-inch

$4.79
SKU:
RSmRA3iRSf7100
Brand:

Availability:
In stock
Weight:
0.04 LBS

RP-SMA male Right Angle To RP-SMA female (straight) Cable

Antenna Cable: RP-SMA Female (regular straight type) to RP-SMA Male Right-Angle: Double-shielded cable.

  • See also this cable in lengths ranging from 20-inch to 5-feet
  • One end has a RP SMA male right-angle connector, and the other end has a RP-SMA female connector with bulkhead nut & washer for mounting and weatherproofing.
  • The cable length stated in the length options is the length between the connectors.
  • Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

One end has an RP-SMA-male right-angle type connector, and the other end has an RP-SMA-female connector, regular straight type, and with bulkhead mount (nut and washer).

Cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR-100, and less attenuation (signal loss) than RG174. The higher quality of this antenna cable coax translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use. Impedance is 50 Ohms.

LMR-100 vs RG-174 Single shielding and double shielding specifications comparison.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

RP-SMA female connector includes a bulkhead nut and washer for mounting & waterproofing:

  • You can use this hardware to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
  • Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
  • The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
  • All of our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.
RP-SMA Female Version Options RP-SMA Elongated
The version of the RP-SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some cable versions on this page, and others by special order. The longer RP-SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some cable versions on this page, and others by special order.

 

Compatibility with wireless standards & applications:

Our RP-SMA extension cables range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.

ROHS 3 and REACH: All of our antenna cables are compliant with ROHS 3 and REACH restrictions on content of lead, other heavy metals and toxic materials.

RP-SMA male to female extension cable is easy and quick to install: The RP-SMA male connector fits the jack on most WiFi routers, and the RP-SMA female connector fits the male connector on antennas with an RP-SMA male connector: Most WiFi antennas with an RP-SMA connector have a male connector. The extension cable enables placing the antenna further from the router, in the most suitable place for line of sight.

RELATED PRODUCTS PAGES:

Write a Review

1 Review

  • 5
    perfect weird part

    Posted by Donahue on 12th May 2016

    Want to get the antennae from your pcie wifi card to stick above the case without untidy loops of wire? These did the job.