RP-SMA-male (Right-Angle) To RP-SMA-female (Right-Angle) Cable: 4FT, 5FT, 6FT
- SKU:
- RSmRA4ftRSfRA100
- Availability:
- In stock
- Weight:
- 0.11 LBS
Data Alliance
RP-SMA-male (Right-Angle) To RP-SMA-female (Right-Angle)
RP-SMA female right-angle to RP-SMA-male aight-angle antenna cable
- One end has a RP-SMA female right-angle and the other has a RP-SMA-male right-angle connector with bulkhead nut & washer for mounting and weatherproofing.
- The cable length stated in the length options is the length between the connectors.
- Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Cable is double-shielded, low-loss and very flexible/easily bendable coax with black jacket.
We offer two options of thickness for this cable: Both are rated for outdoor use and suitable for indoor use.
- The LMR-100 equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. Recommended maximum bend radius is 1.1 inches (28mm).
- The LMR-200-equivalent cable-type is equivalent or better than LMR200: Has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.
- See comparison of LMR-100 and LMR-200 attenuation (signal loss).
- The double-shielding is a major factor in the higher quality of our cables: It translates into lower loss/better performance.
The temperature range for operational use of these cable assemblies are as follows:
- Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
- Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
RP-SMA female right-angle connector includes a bulkhead nut and washer for mounting & waterproofing:
- This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
- Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
- The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option: 14.5mm, which is available as an option. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure
- SMA Dimensions
- SMA Connector Material Composition
- SMA Features and Key Information
Compatibility with wireless standards & applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax, 5G: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors
Our RP-SMA extension cables' range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.
ROHS 3 and REACH: All of our antenna cables are compliant with ROHS 3 and REACH restrictions on content of lead, other heavy metals and toxic materials.
RELATED LINKS: