Antenna 2.4GHz 9dBi &12dbi versions Omni WiFi w/ RP-TNC connector: Signal Booster for Cisco LinkSys Router

Omni WiFi Antenna w/ RP-TNC Connector

Omni Directional Dipole Antenna with RP-TNC (male) connector

• For WiFi / wireless networks
• 9dBi and 12dBi options (choose above)

Omnidirectional dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it.

Compatibility with wireless standards & applications: This omni directional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its very low broadband VSWR at < 1.8 (lower VSWR is better), and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

• IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications.
• 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B
• Compatible with Bluetooth devices, Wireless Access Points & other wireless devices.
• As Bluetooth antenna: Send or receive signal to devices in all directions (360-degree horizontal beamwidth)
• As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case.

Features & applications

• As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
• As client antenna: Connect to an access point in any direction
• Capable of extending your wireless range up to 300 meters.
• Suitable for outdoor or indoor wireless gear with RP-SMA-female or SMA-female connector.

SUMMARY DESCRIPTION

Compatible with Wireless Access Points & cards that have RP-TNC antenna jacks: Cisco/LinkSys Wireless Access Points have an RP-TNC (female) jack that is compatible with this antenna.

SPECIFICATIONS:

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

RP-TNC Connector Characteristics and Details:

• This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection ), or mount the connector on a case, panel or Printed Circuit Board (PCB).
• Weatherproofing : Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.

RP-TNC is a round screw-type connector, with nickel-plated brass.

• Nickel-plated brass is the best plating-alloy for corrosion-resistance.
• RP-TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. RP-TNC's screw-down connector performs better than BNC in the microwave spectrum.
• RP=Reverse Polarity. Gender of RP-TNC is counter-intuitive: Click for details.
• Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. The articulating (bendable) right-angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are therefore recommendable for indoor use or protected outdoors, i.e. under an eave. If you need a weatherproof dipole antenna, you should choose either a straight dipole or one with a fixed right angle. See our weatherproof antennas .

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
• RP-SMA Cables, Antennas and Connectors
• SMA Cables & Adapters

All of our antennas pass QC test before we ship them.