BULLETM2HP:  Same performance & functions as Bullet2HP Wireless-N MIMO technology

SUMMARY                                                                                                                                                                          Español

Upgraded version of Bullet2HP: 

Same performance as Bullet2HP in 802.11g, 802.11b plus it adds Wireless-N 802.11n MIMO technology

Wireless-N 802.11n MIMO technology enables this device to deliver 100Mbps of real TCP/IP speed, wirelessly.

Compatible antennas:  N-female connector; 2.4Ghz frequency band: 

Create an Access Point or Bridge by simply attaching the Bullet to one of these antennas.

One end of the BulletM2HP has an N-male antenna connector and the other end has a standard RJ-45 network cable jack.

Up to 600mW of TX power and enhanced receiver design:  Bullet M is ideal for long-distance links.

Zero-Variable Wireless Infrastructure Deployment with 600mW TX

• No radio card / host board issues
• No RF cable quality concerns
• No mechanical stability concerns
• No enclosure mounting requirements

Bullet does not include a PoE injector or power supply.  Recommended DC voltage range is 10V to 24V. Examples of compatible POE devices: Ubiquiti SKUs: POE15 for $12.99 or POE24.  If you are using a longer cable run with the POE it is best to use 24-volt: POE24.

Featuring Powerful AirOS Software and Linux SDK  Bullet ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.

Reliable System Performance  The Bullet features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a quick and robust weatherproof design.

One end of the BulletM2HP has an N-male plug and the other end has a standard RJ-45 network cable jack.

Also included with Bullet M is AirOS V, the latest evolution in Ubiquiti's AirOS interface. AirOS V maximizes wireless performance for Ubiquiti M Series products.