USB 1.1 CABLE EXTENDER:  UP TO 60-METERS (197FT)  over CAT5 or CAT6 CABLE

Extend USB Cable Over Standard PC network cable: CAT5 / CAT6 Cable.                                                             Español

USB A-male to USB A-female

Place USB wireless clients with antenna high for line-of-sight & more signal gain!

SUMMARY DESCRIPTION

Uses one standard CAT5 cable  (also called UTP cable) with RJ45 plugs

Network Cable can be:  CAT5, CAT6, CAT5e, Cat.5 etc.  Cat5 cable is also called UTP cable, STP cable, PC network cable, or CAT.5E

Extend USB cable up to 60-meters (197 feet) over standard CAT5 cable with RJ45 plugs

Type A Male to Type A Female

Fully compliant with USB 1.0, 1.1 

USB 2.0 is backward compatible with 1.1

RoHS Compliant USB Hi-Speed cable

This cable-extender can be used to extend:

       USB WiFi / wireless devices,

       Printers, Scanners, Web Cameras, Mice, Keyboards, Flash drives, GPS and

       Any other device that has a USB cable with an A-male connector

Condition: NEW.

Works plug and play - no software driver required

Use this USB extender cable with your USB wireless client, in lieu of antenna cables.  Unlike antenna cables (which lose significant signal per meter of cable), this USB extender cable loses only about 2.1% of signal per five meters - and so gives you far more signal strength from your USB wireless client, compared to using coax antenna cables.  (This cable's performance is much better than other five meter active USB cables that we have tested).

Using this extender, you can place your USB wireless client high above your PC and/or outside, where it can receive and transmit WiFi signals much better.  For example, you can gain direct line-of-site to your target wireless access point through better placement of the USB client and its antenna.